Knowledge
KNOWLEDGE
1. Cleaning. First rub the gauze mask gently with warm water and soap. The bowl-shaped mask can be gently cleaned with a soft brush dipped in detergent, and then rinsed with clean water. Please be careful not to rub it hard, because if the warp and weft gap of the gauze is too large, it will lose its anti-dropping effect.
2. Disinfection. Soak the cleaned mask in a 2% peracetic acid solution for 30 minutes or boil it in boiling water for 20 minutes or steam it in a steamer for 15 minutes, and then dry it for later use. This method is suitable for gauze masks and bowl-shaped masks.
3. Check. Before using again, you should carefully check whether the masks and face shields are still in good condition. For gauze masks and face shields, you can take the light transmission method, that is, take the light in front of the lamp and see if there are obvious light spots. Is the rate consistent? If in doubt, replace it with a new one.
-
2023-04-21
What is the main adv…
What is the main advantage of …
-
2023-04-21
Are nonwovens washab…
Are nonwovens washable and bre…
-
2023-04-21
Where are nonwoven f…
Where are nonwoven fabrics use…
-
2023-04-21
Are nonwoven fabrics…
Are nonwoven fabrics environme…
-
2023-04-21
What are the raw mat…
What are the raw materials for…
English