Non-woven license plate cover

1. Requirements: Can normally put on the fuel blue and new energy green license plates, and the product in use can fit the car

brand, not loose, not fall off, not open thread, burr; elastic can not be too tight or too loose, do not

Loosening or popping, breaking, opening wires, etc.; after assembly, the product should be clean and free from stains and oil stains;

The product must not be moldy or abnormal during the warranty period when it is not in use; 50 pieces/box, stored in a built-in PP bag

2. Temperature requirements: -40~70°C, no abnormalities can occur at this temperature

3. License plate cover material, process and printing requirements:

4. Fabric: 80g non-woven fabric, tolerance: plus 5g:

5. Color: black;

6. The fuel license plate size: 440*140mm, the new energy green license plate size is 480*140mm, the largest product

The expanded size is 545*185mm,

7. How to use: The outer ring on the back is fixed with a black elastic band with a width of 0.7mm, and the elastic band is sewn into the non-woven fabric.

Do not leak out, and do not open the wire when using:

8. Transmittance requirements: the license plate number cannot be seen:

9. Smell: The product must not have a pungent smell, confirm that the smell is acceptable